Add a Pepper

Adding, editing and deleting a Pepper

In order to upload to your robot, you need to register Pepper from the Robots header. Make sure you have your robots Body ID, located under the soft cover and above the emergency button on the back of your robot. Once you've completed the steps below, you can see all registered Robots listed under the robot header.

Add a Robot

Follow these steps to add a robot to your fleet.

1. Click on the Robots header at the top of the screen.
2. Click +Add New Robot. A small pop up window will appear.
3. Create a nickname under Robot Name to easily identify robots when working with multiple robots.
4. Enter the Body ID, located under the soft cover and above the emergency stop on Pepper's back.
5. We recommended that you add a location under Location to easier identify your robot.
6. Select the job Pepper will be doing. If you haven't created a job yet, leave it as None and assign later.
7. Click Done

Edit a Robot

To edit a robots nickname, job, or location:

1. Click the Robots nickname. 
2. You will be redirected to the the creation page. 

Alternatively, to edit just a robot job:

1. Find the robot whose job you'd like to change.
2. Click the job name to access a drop down menu.
3. Click the new job name.
4. Click the upload button (two arrows in a circle) to upload your changes to Pepper.

Delete a Robot

1. Click the trash can icon at the first right of their information.
2. A pop up window will appear. Click delete to confirm.